bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Chevrolet RV Waste Valves


  • What Size is the LaSalle Bristol Cable-Actuated RV Waste Valve and What is the Shortest it Comes
  • The LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB72GMA is going to have a 72" long cable. This will allow you to open and close the valve even if it's in a hard-to-reach place. The shortest that this comes is the LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB36GM which has a 36" cable. This is also available in a 48" and 60". 48" - LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB48GMA 60" - LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB60GM
    view full answer...

  • How To Connect Lippert Waste Master RV Sewer Hose To RV Waste Valve
  • I have another option but there is not a Valterra shut off valve that has the camlock connector already installed to work with the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 you were looking at. Instead If your current shut off valve has a 3" bayonet spigot like the Valterra Double RV Waste Valves # TR38B you will need to cut the lugs off of the valve, use sand paper to smooth out the surface, and then use Valterra ABS Solvent Cement # A05-0303...
    view full answer...

  • Replacement Valves For The Bristol Double RV Waste Valves Part # 34466ND14AAR
  • Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot # 34466ND14AAR with the Bristol Waste Valve Body for RV Gray Water w/ Coupler, Seals, and Hardware - 1-1/2" Diameter # 34439241 and the Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter # 34439240.
    view full answer...

  • Handle Extensions For RV Holding Tank Waste Valves
  • Yes, we carry the Extension Rod Kit for Valterra Waste Valve # T1046-12VP, which comes with two adjustable extension rods to increase the length of your valve handle. We also carry cable-actuated waste valves like the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub # 34466N4AB36GM, which can make opening your waste valves easy peasy.
    view full answer...

  • Recommended Black Tank Waste Valve Replacement For A 2016 Airstream Flying Cloud
  • There isn't a guide showing the exact black tank waste valve used on your 2016 Airstream so I have a few examples for valves you can use. If you are replacing just the valve between two flanges then the Valterra Bladex Waste Valve Body for RV Black Water Tank # T1003VP is what you'll want. If your waste valve has two hubs and your sewer system pipes slide into those hubs then you'll want the Valterra Bladex Waste Valve for RV Black Water Tank # T40B. If your waste valve is at the end...
    view full answer...

  • Replacement RV Waste Valve to be Used with Cable Handle
  • The Valterra Waste Valve # T1003PBC is designed to be used with a cable handle so it will work well for you.
    view full answer...

  • Will Valterra 3" Waste Valve Body Work with LaSalle Bristol Waste Valve
  • Yes, you can interchange the Bristol Waste Valve Body for RV Black Water part # 34439240 with the Valterra Bladex Waste Valve Body for RV Black Water Tank part # T1003VP. The mounting pattern and valve size are both industry standards so you can choose between the two as they are interchangeable.
    view full answer...

  • Gray Water Tank Waste Valve With A 48" Cable Actuator
  • There is currently only a 72" cable # TC72PB available to go with the Valterra Waste Valve for RV Gray Water Tank # T1001PBC. If you want a gray water waste valve with a 48" cable you would need the LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank # 34466N11AB48GMA.
    view full answer...

  • Replacement 3 inch Waste Valve to Replace Bristol Waste Valve
  • Yes, the Valterra RV 3 inch Waste Valves, like part # T50, are designed to fit standard waste fittings. The part that I referenced is just the regular waste valve. If you are looking at a specific design, you can find a variety of designs on the linked product search page. You will want to make sure to use Solvent Cement, like part # A05-0303, for a complete and secure installation.
    view full answer...

  • Replacement Waste Valve Handles For 2021 Grand Design Imagine 17MKE Travel Trailer
  • Yes, because based on my research your 2021 Grand Design Imagine 17MKE travel trailer uses LaSalle Bristol waste valves, so the correct replacement handles in black and gray are the following: - Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves - Black Water Tank # 34490CMA1 - Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves - Gray Water Tank # 34490CMA1G
    view full answer...

  • Were There Standard Waste Valve Sizes on Older RVs?
  • There is no industry standard for RVs when it comes to the pipes, except that the black water pipes are larger than the grey water pipes. We have a large selection of waste valves, and the pipe size as well as the type of fitting you need will determine which you should get. I've added a link to our page with each of our waste valves for you to take a look at.
    view full answer...

  • How to Figure Out Which Black Tank Valve is Needed
  • We can offer steps on how to determine the correct black tank valve, though unfortunately isn't a way for us to know the exact valve that is on your Montana 5th wheel. To determine the right one is pretty easy, as you just need to know if the valve you are replacing slid over your pipe or into your pipe. If both ends of your waste valve slid into your sewer pipe you will need the Valterra Bladex Waste Valve for RV Black Water Tank - 3" Spigot to 3" Spigot # T40A. If both ends of your...
    view full answer...

  • Will the Bristol Double RV Waste Valve Fit on a 1996 Fleetwood Montana Tioga
  • As long as you've got a 3" black water pipe and 1-1/2" grey water pipe, you'll be able to use the Bristol Double RV Waste Valve # 34466ND13BAR on your 1996 Fleetwood Montana Tioga. We don't have a database that tells us what will fit on which coach, but these are the most commonly used pipe sizes for these waste pipes so they're going to fit on most coaches. I do recommend measuring your existing pipes to confirm fitment. In order to install this waste valve you will need ABS cement like...
    view full answer...

  • How To Attach The LaSalle Bristol RV Lug Adapter with Flange To A Cable Actuated Waste Valve
  • No, the LaSalle Bristol RV Lug Adapter with Flange # 34466V13B can easily be bolted to the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank # 34466N4AB36GM. You'll simply need to remove the four bolts on the waste valve and remove one side (either the spigot or hub) and replace it with the new flange.
    view full answer...

  • Can Valterra Bladex Waste Valve for RV Black Water Tanks be Used with Automatic Black Water Drain
  • Yes, you could use Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Spigot Item # T40 with an automatic black water draining system such as Valterra EZ Valve Electric Waste Valve - 3" Hub x Hub x Bayonet - Double Rotating Flange # E84-8.
    view full answer...

  • Does Valterra Waste Valve Body With 72 Inch Cable Replace Valterra Bladex
  • You can use the Valterra Waste Valve Body with Flexible Cable for RV Black Water Tank - 72" # TC372 to replace your 3" diameter Valterra Bladex. Both have a 3" diameter valve body which is the important aspect and why it will work for you. I have added a link to a video review for you to check out as well of the Valterra Waste Valve Body with Flexible Cable for RV Black Water Tank - 72" # TC372.
    view full answer...

  • Determining The Correct Replacement Waste Valve Fittings For A 20007 Keystone Trailer
  • If you're looking to just replace the valves on your gray and black tanks then the Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks - 72" # TC1372 you were looking at would replace the valves. These valves bolt in-between two hub flanges. If your current valves don't have bolts and are glued in you would need different valves. If you send in some pics I can help find the correct fittings. If you're looking for a double waste valve like the Double...
    view full answer...

  • Waste Valves to Replace Those With Rods That Are Falling Off
  • If your waste valve handles and rods are falling off you are going to need to replace your waste valves. I have added a link to our entire selection of waste valves so you can find the exact replacement you need, based on the connection you need. I also recommend considering an electric valve such as the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter # E1003VP to mitigate this type of issue. I have added a link to a video review of this valve for you to...
    view full answer...

  • Can Waste Valve Extension Tube and Handle be Used as a Replacement
  • The Valterra Waste Valve Extension Tube with Handle # TX9HPB can be used as a replacement, but they do thread in (see accompanying photo). If you can no longer thread in a rod, you are going to need to replace your waste valve with something like the Valterra Waste Valve Body w/ Flexible Cable for RV Gray Water Tank - 72" # TC172 or whatever type of waste valve you need. I have added a link to our entire selection of waste valves for you to check out.
    view full answer...

  • Can a Bristol Waste Valve Be Used in Place of a Valterra Waste Valve?
  • Yes, Bristol is a manufacture not a specific type of fitting. As long as the opening diameter and fitting type is the same then you can use one with the other. The Valterra Waste Valve item # T58 you were looking at is a straight pull manual valve that uses 3" diameter bayonet hook fittings. I have linked a review video below.
    view full answer...